Dealer Tuning Kit - ADVANCED (OBD + BDM + JTAG + TRICORE)
This kit contains:
Alientech Kessv2 Hardware (OBD programming)
144300KCAN (OBD cable)
144300K201 (Universal 5-wire cable for non standard obd)
14P600KCK4 (K4 25pin Bootloader cable)
Alientech K-Tag Hardware (BDM + JTAG + Tricore programming)
Adapterkit for power with different iso standards
14P600KT02 (Direct connection cable)
144300K218 (Extra connection power cable)
144300KTST (BDM/Boot cable kit for adapters)
Our recommendation is to purchase an power supply too, because stable voltage can prevent flashing troubles.
Note: It is required to purchase desired protocol for the KessV2 Tool depending on type of vehicles you want to tune. For some specific models or vehicle types you will have to purchase coresponding cable set. K-Tag Tool have all required protocols included.
OBD is the vehicles's diagnostic plug and is the easiest way to tune a vehicle. Simply stabilize the power of the vehicle with a good power supply, connect the tool to the OBD plug and read and write the car's ECU. BDM, JTAG or Tricore are a bit more difficult, as You actually need to take the ECU out of the car, open it and connect to specified pins on the ECU or it's motherboard to communicate with it.
There can also be some soldering included in the work. Purchasing additional adapters made for certain ECU types can really make this job even easier.
To find out which vehicles you can tune over OBD with Kess V2 Tool CLICK HERE
To find out which vehicles you can tune with K-Tag Tool CLICK HERE
For more info about different types of tuning CLICK HERE
- Additional Information
SKU No Video No
You may also be interested in the following product(s)
As low as: €3,243.-
There are no product questions yet.