Call Us +47 90916585

Welcome to Tuningtools // Sedox Store!

Dealer Tuning Kit - PROFESSIONAL

Dealer Tuning Kit - PROFESSIONAL

As low as: €3,243.-

Price as configured: €0.-

Availability: In stock

Dealer Tuning Kit - PROFESSIONAL
1 x KESSv2 hardware without protocols SLAVE    (In Stock)   +€900.-
1 x K-TAG flashing tool with all protocols SLAVE    (In Stock)   +€1,500.-

* Required Fields

Price as configured: €0.-



Dealer Tuning Kit - PROFESSIONAL (OBD + BDM + JTAG + TRICORE + EPROM PROGRAMMER with adapters + SOLDERING STATION with adapters)

This kit contains:
Alientech Kessv2 Hardware (OBD programming)
Power adapter
USB cable
144300KCAN (OBD cable)
144300K201 (Universal 5-wire cable for non standard obd)
14P600KCK4 (K4 25pin Bootloader cable)

Alientech K-Tag Hardware (BDM + JTAG + Tricore programming)
Power adapter
Adapterkit for power with different iso standards
USB cable
14P600KT02 (Direct connection cable)
144300K218 (Extra connection power cable)
144300KTST (BDM/Boot cable kit for adapters)

Elnec BeeProg2C EPROM programmer with adapters

Metcal MX-5200 Soldering and Rework System with adapters

Our recommendation is to purchase an power supply too, because stable voltage can prevent flashing troubles.

Note: It is required to purchase desired protocol for the KessV2 Tool depending on type of vehicles you want to tune. For some specific models or vehicle types you will have to purchase coresponding cable set. K-Tag Tool have all required protocols included.

OBD is the vehicles's diagnostic plug and is the easiest way to tune a vehicle. Simply stabilize the power of the vehicle with a good power supply, connect the tool to the OBD plug and read and write the car's ECU. BDM, JTAG or Tricore are a bit more difficult, as You actually need to take the ECU out of the car, open it and connect to specified pins on the ECU or it's motherboard to communicate with it.

There can also be some soldering included in the work. Purchasing additional adapters made for certain ECU types can really make this job even easier.

Regarding the BeeProg EPROM programmer, it is being used for the oldest generation ECUs which are found in many trucks or older cars. The chip needs to be soldered out from the motherboard, read out and reprogrammed with the BeeProg and then soldered back into the ECU.

This all maybe seems a bit difficult, but with some practice it becomes easy.

All this requires precision and stable temperature during soldering and Metcal sodlering station included in this kit gives you just that.

To find out which vehicles you can tune over OBD with Kess V2 Tool CLICK HERE

To find out which vehicles you can tune with K-Tag Tool CLICK HERE

For more info about different types of tuning CLICK HERE

Additional Information

Additional Information

Video No


Posted by Carlo Rivera, Wednesday, July 29, 2015 on product Dealer Tuning Kit - PROFESSIONAL


I am interested in become a dealer but I'm from Mexico and I am concerned about your time of service. What is your operating hours ?

Have a Comment to Add? Create an Account to Reply to this Question.

Ask a question and Give an answer. Help your fellow customer.

Ask Your Question

* Required Fields

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.